Honeywell MX7 Tecton User Manual page 134

Message Explanation and/or corrective action
Exit ToAdmin Exiting the function that handles the mode switch into admin mode.
Exit ToUser Exiting the user mode switch function.
Exit ToUser-Registry The AppName value does not exist in the registry so user mode cannot be en-
read failure tered.
Exit verify password- Exiting password verification.
no pwd set
Exit verify password- Exiting password verification.
response from dialog
Found taskbar The handle to the taskbar has been found so that AppLock can disable it in user
mode.
Getting address of AppLock is retrieving the address of the keyboard hook.
keyboard hook init pro-
cedure
Getting configuration The AppLock configuration is being read from the registry. This occurs at ini-
from registry tialization and also at entry into user mode. The registry must be re-read at en-
try into user mode in case the administration changed the settings of the
application being controlled.
Getting encrypt pwd The length of the encrypted password is being calculated.
length
Hook wndproc failure AppLock is unable to lock the application. This could happen if the application
being locked encountered an error after performing its initialization and shut it-
self down prior to being locked by AppLock.
Hook wndproc of open The application is open, but AppLock cannot lock it.
app failure
Hot key event creation The Admin applet is unable to create the hotkey notification.
failure
Hot key pressed Processing the hotkey and backdoor entry
Hot key pressed Processing the hotkey and backdoor entry
Hot key set event fail- When the administrator changes the hotkey configuration the hotkey controller
ure must be notified. This notification failed.
Hotkey press message The user just pressed the configured hotkey.
received
In app hook:WM_SIZE In addition to preventing the locked application from exiting, AppLock must also
prevent the application from enabling the taskbar and resizing the application's
window. This message traps a change in the window size and corrects it.
In app hook:WM_WIN- In addition to preventing the locked application from exiting, AppLock must also
DOWPOSCHANGED prevent the application from enabling the taskbar and resizing the application's
window. This message traps a change in the window position and corrects it.
Initializing keyboard AppLock is calling the keyboard hook initialization.
hook procedure
Keyboard hook initial- The keyboard filter initialization failed.
ization failure
Keyboard hook loaded The keyboard hook dll exists and loaded successfully.
OK
L after Ctrl Processing the backdoor entry.
Loading keyboard When AppLock first loads, it loads a dll that contains the keyboard hook pro-
hook cessing. This message is logged prior to the load attempt.
Open failure The status information is being saved to a file and the file open has failed. This
could occur if the file is write protected. If the file does not exist, it is created.
Open registry failure If the Administration registry key does not exist, the switch to user mode fails
because the AppName value in the Administration key is not available.
128
Level
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_ERROR
LOG_PROCESSING
LOG_EX
LOG_EX
LOG_PROCESSING
LOG_ERROR
LOG_EX
LOG_EX
LOG_PROCESSING
LOG_ERROR
LOG_ERROR