Honeywell MX7 Tecton User Manual page 238

Parameter
LED
Tray Icon
Hide Password
Admin Password SUMMIT
Auth Timeout
Certs Path
Ping Payload
Ping Timeout ms 5000
Ping Delay ms
Note: Tap the Commit button to save changes. If this panel is closed before tapping the Commit button, changes are
not saved!
234
Default Function
Off The LED on the wireless card is not visible to the user when the wireless card
is installed in a sealed mobile device.
Options are: On, Off.
This parameter cannot be changed.
On Determines if the Summit icon is displayed in the System tray.
Options are: On, Off
On When On, the Summit Config Utility masks passwords (characters on the
screen are displayed as an *) as they are typed and when they are viewed.
When Off, password characters are not masked.
Options are: On, Off.
A string of up to 64 alphanumeric characters that must be entered when the Ad-
(or Blank) min Login button is tapped. If Hide Password is On, the password is masked
when typed in the Admin Password Entry dialog box. The password is case sen-
sitive. This value is masked when the Admin is logged out.
Options are: none.
8 seconds Specifies the number of seconds the Summit software waits for an EAP authen-
tication request to succeed or fail.
If the authentication credentials are stored in the active profile and the authen-
tication times out, the association fails. No error message or prompting for cor-
rected credentials is displayed.
If the authentication credentials are not stored in the active profile and the au-
thentication times out, the user is again prompted to enter the credentials.
Options are: An integer from 3 to 60.
System A valid directory path, of up to 64 characters, where WPA Certificate Authority
and User Certificates are stored on the mobile device when not using the Win-
dows certificates store. Make sure the Windows folder path currently exists be-
fore assigning the path in this parameter. See Certificates for instructions on
obtaining CA and User Certificates. This value is masked when the Admin is
logged out.
Options are: none.
For example, when the valid certificate is stored as My Computer/System/MY-
CERTIFICATE.CER, enter System in the Certs Path text box as the Windows
folder path.
32 bytes Maximum amount of data to be transmitted on a ping.
Options are: 32 bytes, 64, 128, 256, 512, or 1024 bytes.
The amount of time, in milliseconds, that a device will be continuously pinged.
The Stop Ping button can be tapped to end the ping process ahead of the ping
timeout.
Options are: Any number between 0 and 30000 ms.
1000 The amount of time, in milliseconds, between each ping after a Start Ping button
tap.
Options are: Any number between 0 and 30000 ms.