Label Locations - Honeywell MX7 Tecton User Manual

C
MX7 Tecton Agency Compliance
MX7 Tecton mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation.
The best way to ensure safe operation is to use the mobile computer according to the agency guidelines in this user guide and
on the regulatory sheet shipped with the terminal. Read all guidelines before using your Dolphin terminal. To download product
documentation for the MX7 Tecton mobile computer, go to www.honeywellaidc.com.
This documentation is relevant for the following models: Tecton, TectonCS.
The EU declaration of conformity, if applicable, and other publicly downloadable certificates are available at
wellaidc.com/compliance..
Caution: Read the Cautions and Warnings
vice using the battery before attempting to install, use, or charge the battery. Risk of fire and burns if improperly han-
dled. Do not open, crush, heat above 60°C (140°F), or incinerate.

Label Locations

Model Number and Serial Number Labels
The model (item) number and serial number for the terminal are located on labels affixed to the back of the terminal.
(page 266) and all cautionary markings on the battery, charging peripheral, or de-
If the following label is attached to your product, it indicates
the product contains an engine with a laser aimer:
AVOID EXPOSURE - LASER RADIATION IS
EMITTED FROM THIS APERTURE.
EN60825-1:2007 IEC60825-1:2007
COMPLIES WITH 21 CFR 1040.10 AND 1040.11
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1.0mW - 630 - 680nm
www.honey-
337