Power - Honeywell MX7 Tecton User Manual

Power

Start > Settings > Control Panel > Power
The MX7 Tecton power mode timers are cumulative.
The System Idle timer begins the countdown after the User Idle timer has expired and the Suspend timer begins the count-
down after the System Idle timer has expired.
When the User Idle timer is set to "Never", the power scheme timers never place the device in User Idle, System Idle or
Suspend modes (even when the device is idle).
The Display > Backlight setting is synchronized with the User Idle setting in the Schemes tab in the Power control panel.
Setting
Battery Tab
Schemes Tab
Battery Power - User Idle Timeout
Battery Power - System Idle Timeout
Battery Power - Suspend Timeout
AC Power - User Idle Timeout
AC Power - System Idle Timeout
AC Power - Suspend Timeout
Device Status Tab
92
Default
No user interaction
3 seconds
15 seconds
5 minutes
2 minutes
2 minutes
5 minutes
No user interaction