Maintenance Inspection Report - Genie Z-60/34 Service Manual

November 2003
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
· Make copies of both pages to use for
each inspection.
· Select the appropriate checklist(s) for
the type of inspection to be
performed.
Daily or 8 hour
Inspection:
Quarterly or 250 hour
Inspection:
Six Month or 500 hour
Inspection:
Annual or 1000 hours
Inspection:
2 Year or 2000 hour
Inspection: A+B+C+D+E
· Place a check in the appropriate box
after each inspection procedure is
completed.
· If any inspection receives an "N", tag
and remove the machine from
service, repair and re-inspect it. After
repair, place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Comments
Part No. 75861

Maintenance Inspection Report

Checklist A - Rev A
A-1 Pre-operation
inspection
A-2 Engine maintenance -
Deutz models
A-3 Engine maintenance -
Ford models
A-4 Fuel leaks
A-5 Functions tests
A-6 Drive hub
maintenance
A-7 Filter condition indicator
(if equipped)
A-8 Oscillate axle
(if equipped)
Perform after 50 hours:
A-9 30 day service
Perform every 100 hours:
A-10 Engine Maintenance -
Ford models
A-11 Fuel filters -
Ford models
A-12 Fuel filter/separator -
A
Deutz models
A-13 Rotation bearing
A+B
Perform after 150 hours:
A-14 Drive hub oil
A+B+C
Perform every 200 hours:
A-15 Engine maintenance -
A+B+C+D
Ford models
Genie Z-60/34
Section 3 • Scheduled Maintenance Procedures
Y N R Checklist B - Rev A
B-1 Battery
B-2 Electrical wiring
B-3 Key switch
B-4 Engine maintenance -
Ford models
B-5 Exhaust system
B-6 Oil cooler and fins-
Deutz models
B-7 Lug nut torque
B-8 Brake configuration
B-9 Drive hub oil level
B-10 Engine RPM
B-11 Ground control override
B-12 Directional valve
B-13 Platform leveling
B-14 Engine idle select
B-15 Fuel select -
Ford models
B-16 Drive brakes
B-17 Drive speed -
stowed position
B-18 Drive speed -
raised or extended
position
B-19 Alarm package
B-20 Hydraulic oil analysis
B-21 Hydraulic filters
Perform every 400 hours:
B-22 Engine maintenance -
Deutz models
B-23 Engine maintenance -
Ford models
Y N R
3 - 5