Table of Contents
Advertisement
Recorder Mode - The "Display" Menu
Recorder Mode (cont'd)
The "Display" Menu
Zoom off
Maximum/Minimum
Particular case
SCOPIX Oscilloscopes
Returns to the original screen size after zooming in on part of the screen.
• This function is disabled unless the screen is in zoom mode.
• If the Zoom mode is active, the letter "Z" is displayed in the trace
and time-base parameter display area.
This menu can also be called up by double-tapping with the stylus inside the
curve display area.
The minimum (or maximum) option consists in:
•
searching for the min (or max) value of samples on trace X;
•
centering, if possible (zoom), the curve on this specific point.
The main cursor is now fixed on this sample.
Display of 10 faults on the screen when fault capture mode is validated and
the horizontal zoom is not enabled: "Minimum/Maximum" functions cannot be
used.
They are greyed out in this configuration.
VII - 137
Advertisement
Table of Contents
