Table of Contents
Advertisement
Technical Specifications
Technical Specifications (cont'd)
« Oscilloscope » Function
Horizontal deflection (time base)
Characteristics
Time base ranges
Time base accuracy
Sampling rate
Time measurement accuracy
Horizontal ZOOM
Mode XY
Phase error
Representation
Fast Fourier Transform
SCOPIX Oscilloscopes
without the
EXTENDED ACQUISITION MEMORY
option
35 ranges, from 1 ns to 200 s/div.
50 GS/sec. with repetitive signal
± [(0.02 div.) x (time/div.) + 0,005 x reading + 1 ns]
Zoom factor : from x1 to x5.
recording memory capacity :
2,500 samples per channel
In ZOOM and normal modes : the same sequence of time base range is used.
The horizontal resolution of the screen is 500 samples for 10 divisions.
The bandwidths are identical in X and in Y (refer to §. Vertical deflection).
As in normal mode, the sample frequency depends on the time base value.
temporal or frequential (FFT)
•
calculation on the traces present in the screen area
•
dynamic refreshment as a function of the signal observed in RUN mode
•
windowing: rectangle, Hamming, Hanning, Blackman
•
scales: logarithmic or linear
•
automatic adjustment with autoset function
OX 7102 - OX 7104
EXTENDED ACQUISITION MEMORY
± 0.1 %
1 GS/sec. in real time
40 GS/sec. with repetitive signal
Zoom factor : from x 1 to x 100.
recording memory capacity :
50,000 samples per channel
< 3°
with the
option
X - 185
Advertisement
Table of Contents
