Display Features; Button Functions; Hold/Peak Button; Zero Button - AEMC CM605 User Manual

2.2 Display Features

2.3 Button Functions

2.3.1

HOLD/PEAK Button

Data Hold Function: This function locks the displayed value.
• To activate, press this button during the measurement. The
appears and the measurement is locked.
• To deactivate, press the button again.
Peak Hold Function: This function displays the peak value.
• To activate, press this button during a measurement until the
appears.
• The highest measurement is stored in memory.
• To deactivate the PEAK function, press and hold down the button for
approximately 2 seconds.
2.3.2

ZERO Button

• To activate, press the ZERO button to enter the Zero mode.
• The
The reading is stored as a reference value for subsequent measure-
ments.
• To exit the Zero mode, press the ZERO button again.
AC Clamp-on Meter Model CM605
symbol will appear and Zero the display.
Negative polarity
Auto shutdown
Low battery
AC mode
DC mode
Auto range
Zero (Relative)
Peak function
Hold function
Continuity
A V
Current / Voltage
Ω
Resistance
symbol
symbol
5