Oscilloscope Mode - The "Measure" Menu
Oscilloscope Mode (cont'd)
The "Measure" Menu
Reference
Trace 1
Trace 2
Trace 3
Trace 4
Automatic
measurements
SCOPIX Oscilloscopes
(∗)
Selection of the trace on which the automatic or manual measurements
will be performed.
Only the active traces can be selected. Inactive traces are displayed in a
lighter color.
The " " symbol indicates the reference trace.
Opens the "Automatic measurements" menu window.
The measurements are performed and refreshed on the selected
reference trace. All the measurements that can be performed on this
trace are displayed.
(- . - -) is displayed for measurements that cannot be performed.
The window can be validated and closed by pointing to OK with the
stylus.
The selected measurement(s) will be displayed in the status area.
(∗)
Function only accessible
in "Advanced" mode.
See §. Description, page 90.
IV - 77