AEMC OX7102-CII User Manual page 175

Applications
Applications (cont'd)
b) Hard copy of the
screen on a network
printer
SCOPIX Oscilloscopes
Screen copyi ng can be initiated on a network printer.
Oscilloscope
IP Address =
1 32.147.200.74
ETHE RNET
network
•
Use a suitable ETHERNET cable to link the oscilloscope to the network.
•
Open the oscilloscope's "Network" menu.
•
Enter the IP address manually or automatically using the icon "provide
by a DHCP server" (if the server is access
Example: 132.147.200.74
•
Enter the IP address of the network printer
numbers after selecting the zone to be modified .
Example: 132.147.200.74
•
Specify the name of the req
To find out the IP address of the server or the name of the printer,
contact the network administrator
•
Then validate the information by choosing OK.
• Open the "Hardcopy" menu (See §
•
According to the printer conne
type of printer.
•
Validate the colour or black/white option.
•
Validate the Network opt
•
Configure the oscilloscope so that it displays the screen as you wish to print it.
Start the required print operation by pressing the key opposite.
IP Address =
1 32.147.200.10
ible).
using the table of usable
uired printer ( Example: LaserJet 4)
responsible for your IT installation.
. "Util" Menu) of the oscilloscope.
cted to the network, select the print format or
ion of the port menu.
Printer
d
IX - 175