Multimeter Mode - The "Vertical" Menu
Multimeter Mode (cont'd)
Autorange
Coupling
Bandwidth limit
SCOPIX Oscilloscopes
When this option is selected, the measurement range changes
automatically.
The " " symbol shows that it is active.
If the option is disabled, the range can be modified manually, using the
keys opposite or the "Range" menu, depending on the type of
measurement being performed.
Modification of the AC, DC or AC+DC coupling for amplitude measurement.
AC: AC voltage measurement
DC: DC voltage measurement
AC + DC: Measurement of AC voltage with a DC component
For AC and AC+DC measurements, the menu "Display
be used to display the frequency of the signal in the secondary display field.
The " " symbol indicates the type of coupling selected.
The coupling is updated in the modified channel parameter display zone.
If the channel measures an AC or AC+DC voltage (see Coupling), it is
possible to filter the signal with a low-pass analogical filter whose cut-off
frequency is 5 kHz.
Frequency" can
V - 101