AEMC OX7102-CII User Manual page 172

Applications (cont'd)
Triggering after
a djustment window
Resulting Curve
IX - 172
Adjust the position of the vertical position indicator of channel CH1 to
-149°C, as follows:
•
Press key CH1, then on t
is displayed at the bottom right of the screen.
•
Apply the end of the temperature probe to the end of the soldering iron.
•
When th e end is in position, launch acquisition using the key opposite.
•
Connect the soldering iron.
This acquisition shows the heating dynamic of the soldering iron.
he keys opposite. The position of the indicator
Applications
SCOPIX Oscilloscopes