AEMC OX7102-CII User Manual page 133

Recorder Mode - The "Trigger" Menu
Recorder Mode (cont'd)
Authorised on
Date/Time
Example
Fault capture
SCOPIX Oscilloscopes
This tab allows the user to validate – or not – delayed triggering.
• If the symbol " " is displayed, delayed triggering has been validated.
• If there is no symbol, delayed triggering has not been validated.
Use the stylus to validate or unvalidate the tab.
• When delayed triggering has been validated, the user can no longer make an
acquisition in recorder mode. He/she may, however, use the other modes as
desired.
If the user wishes to make an acquisition in recorder mode, he/she must:
- either unvalidate delayed start-up,
- or wait until the delayed start-up acquisition begins.
• At the time the acquisition is set to start (delayed triggering time), the
instrument must be in operation and the user must have enabled recorder
mode.
Different scroll boxes allow the user to set the date and time he/she wishes the
acquisition to commence.
Use the stylus to scroll.
Delayed triggering: the acquisition will commence on January 26, 2005 at 17:44.
The red clock symbol shows the user that delayed start-up is enabled.
Delayed start-up symbol and time
Fault capture mode enables 10 recordings of 250 samples to be made around the
trigger point (or 100 recordings of 500 samples around the trigger point if the
EXTENDED ACQUISITION MEMORY option is installed).
These 10 recordings will be displayed on the screen. Each recording is
separated by a solid vertical line. They are recorded in volatile memory.
VII - 133