Device Settings (Menu M2); Wireless Device Pairing; Clearing Test Results - Interacoustics OtoRead Instructions For Use Manual

OtoRead™ Instructions for Use - US

Device settings (menu M2)

3.11.4.1 Wireless device pairing

W
hen pairing to a computer for use with the OtoRead
availability; if not, a dongle will be required. Confirm the wireless settings of the computer Allow wireless
devices to find this PC.
Select the Wireless pairing menu and press
computer is seen on the device, select
display on your computer 'Add a device'. Select this notification on your computer and enter PIN 1234. The
first time the OtoRead TM

3.11.4.2 Clearing test results

The OtoRead
unit with a wireless device, such as a thermal printer or personal
computer, for printing test results and data transfer.
The OtoRead
To establish wireless pairing, turn on the device that will be paired with
the OtoRead
initiate discovery of available wireless devices. The OtoRead
search for available wireless devices for approximately 15 seconds.
During this time the user will see the message 'Please Wait' on the
display and the yellow 'TEST' LED will flash. Discovery can be
canceled by pressing the
When discovery is complete, all discovered devices will be shown in
the order in which they were found. A compatible thermal printer will
appear as 'PRT-##-##' (e.g.: PRT-54-81) and other devices will be
shown by their name which can vary depending on the device. Use
the CHANGE
the PAIR button to pair the OtoRead
Pairing will be confirmed. The pairing process is complete. Select
Main Menu to exit the wireless pairing menu.
PAIR. While the device is pairing to the computer a notification will
Module is opened, select Detect Com Port to finalize the OtoRead
The Test Results Clear menu allows the user to clear the test
results stored in the unit without printing them. Select the LEFT
or RIGHT arrow key to clear the results and select Yes or No
to verify clearing or to cancel. To advance to the next menu
without clearing the results, press
Following printing or data transfer to the PC software, all tests
saved in memory are marked for deletion and will be permanently
deleted when a new test is started. It is not necessary to
manually clear the results using this menu.
TM
pairing menu allows the user to pair the OtoRead
TM can be paired with only one device at any one time.
TM
(e.g.: thermal printer). Then select
CANCEL button.
buttons to select the desired device and then use
TM
Module, confirm the computer has wireless
DISCOVER to start the pairing process. When the
DISCOVER
TM
to the selected device.
TM connection.
NEXT.
Page 32
TM
to
TM
will