Interacoustics OtoRead Instructions For Use Manual page 13

OtoRead™ Instructions for Use - US
General warnings and precautions
The following safety precautions must be observed at all times. General safety precautions must be followed
when operating electrical equipment. Failure to observe these precautions could result in damage to the
equipment and injury to the operator or patient.
The employer should instruct each employee in the recognition and avoidance of unsafe conditions and the
regulations applicable to his or her work environment to control or eliminate any hazards or other exposure to
illness or injury.
It is understood that safety rules within individual organizations vary. If a conflict exists between the material
contained in this manual and the rules of the organization using this instrument, the more stringent rules
should take precedence.
Read the entire instructions for use before attempting to use the system!
CAUTION
If the system is not functioning properly, do not operate it until all necessary repairs have been completed
and the unit has been tested and calibrated for proper functioning in accordance with Interacoustics
published specifications.
Do not drop or otherwise cause undue impact to this device. If the instrument is dropped or otherwise
damaged, return it to the manufacturer for repair and/or calibration. Do not use the instrument if any damage
is suspected.
This product and its components will perform reliably only when operated and maintained in accordance with
the instructions contained in this manual, accompanying labels, and/or inserts. A defective product should
not be used. Make sure all connections to external accessories are snug and secured properly. Parts which
may be broken or missing or are visibly worn, distorted, or contaminated should be replaced immediately
with clean, genuine replacement parts manufactured by or available from Interacoustics.
Equipment is not user repairable. Repairs must be performed by an authorized service representative only.
No conications of the equipment are allowed by anyone other than a qualified Interacoustics representative.
Modification of the equipment could be hazardous.
Interacoustics will make available on request: circuit diagrams, component part lists, descriptions, calibration
instructions, or other information that will assist authorized service personnel to repair those parts of this
instrument that are designated by Interacoustics as repairable by service personnel.
Keep Dry.
Transport and Storage Temperature range.
Transport and Storage Humidity limitations.
Transport and Storage Atmospheric pressure limitations.
Page 7