Connection To The Pc Module - Interacoustics OtoRead Instructions For Use Manual

OtoRead™ Instructions for Use - US
Note: All printed test results are marked for deletion, but will continue to be stored in memory until a new test
is started at which time all tests in the memory will be erased. This allows the user to reprint the tests if
printing is unsuccessful (for example, the paper runs out before printing is complete).
Note: See the OtoRead

Connection to the PC module

Connection to the PC Module is achieved by using the provided Micro-USB to USB-A cable or wireless.
Note: See the OtoRead
USB Connection:
Wireless Connection:
TM
Module Manual for instructions on printing from the PC Module.
TM
Module Manual for instructions on using the application.
Plug the correct end (USB-A) of the cable into an available USB port on
the computer and the correct end (Micro-USB) of the cable into the port
found on the bottom of the OtoRead
The OtoRead TM will detect the connection to the PC and wait for an action
or communication from the PC Module.
Refer to the OtoRead
TM
.
TM
Module Manual for wireless connection.
Page 28