OtoRead™ Instructions for Use - US
Date and time settings (menu M1)
3.11.3.1 Setting initial date and time
TM
When the OtoRead
is first used, the correct date and time will need to be set on its internal clock. The date
and time are listed on the test printout as day-month-year (e.g., 07-MAR-17). The clock should be set prior to
testing, as changing it after tests are saved will not change the date on the printout (i.e., whatever date was
previously in memory will be the date on the printout).
3.11.3.2 Daylight saving time
Seasonal time changes such as Daylight Saving Time will also require resetting the clock. If the instrument is
being powered on for the first time or if the instrument's battery is completely discharged and the battery is
not charged within approximately one hour a TIME/DATE ERROR message will occur. If this message
appears, reset the time and date.
3.11.3.3 Changing the date and time
If either the date or time is incorrect, press the
access the menu to change the month. Press the LEFT or RIGHT
keys to scroll forward or backward through the months.
You will see the abbreviated name for each month. When the desired
month appears on the display, press the
selection screen. Pressing the LEFT or RIGHT keys will scroll
through the days of the month. Repeat this process for the year, hour,
and minute using the LEFT or RIGHT arrow keys to make the
selection and the
NEXT key to advance to the next display.
When the correct minute is selected, pressing the
key will return to the Main Menu. The time and date changes are
automatically saved.
Page 31
CHANGE key to
NEXT key to enter the day
DOWN arrow