Interacoustics OtoRead Instructions For Use Manual page 17

OtoRead™ Instructions for Use - US
Installing the cradle
Connect the Type B USB plug of the power supply to
the rear of the cradle (1).
WARNING
USE ONLY UE08WCP-050160SPA POWER
SUPPLY.
The separable mains connector for UE08WCP-
050160SPA is used to safely disconnect mains from
the device. Do not position the power supply in a
1
position so that it is difficult to disconnect the device.
Do not attempt to use any other power supply. It could
cause risk of fire or electrical shock to operator or
patient
Place the cradle upright on your desk. There are
insertion guides to place the instrument properly into
the cradle.
Two pins can be found on the bottom of the
2
instrument bay to guide the OtoRead
3
A USB plug will guarantee a proper connection via the
e
USB cable (3) .
Place the OtoRead
within the U-shaped placement guides. Proper
placement in the cradle is needed to ensure charging
of the battery.
Grasp the upper portion of the OtoRead
cradle placement guides and lift it out of the cradle.
TM
into place (2).
TM
into the cradle so that it sits
TM
Page 11
above the