Selecting The Test Protocol - Interacoustics OtoRead Instructions For Use Manual

OtoRead™ Instructions for Use - US
Performing the test

Selecting the Test Protocol

The currently selected protocol is shown on the Main Menu.
To change the selected protocol press
The Change Protocol Display will appear.
Use the CHANGE arrow buttons to change the selected protocol.
Press the UP arrow to return to the Main Menu to begin testing.
Press the SETUP to enter the setup menus.
For either DPOAE or TEOAE screener devices, there are two default
test protocols that vary depending on averaging time. Screener default
protocols cannot be customized. Diagnostic protocols are customizable.
Appendix D contains complete information on protocol settings.
CHANGE at the Main Menu.
Page 21