Using The Printer; The Otoread Tm Test Instrument - Interacoustics OtoRead Instructions For Use Manual

OtoRead™ Instructions for Use - US

Using the printer

Printer self-test:
While printer is powered OFF, press and hold PAPER FEED
BUTTON simultaneously. When beep is heard after approx. 3 seconds, release both buttons, and a
test page will print with information on current status and character samples.
Paper feed:
When powered, press PAPER FEED
Wireless setup:
Pairing with the instrument is necessary before wireless printing is possible.
Pairing process:
•
Power on printer
•
Let the instrument / PC search for other wireless devices
•
A device called MPT-II should appear in the list of devices
•
When prompted enter password "1234"
•
Finish pairing
Note: Do not have several printers powered on and within range while searching.
It is possible to pair up to 8 instruments with one printer. If more instruments are paired, the oldest will be
deleted.
The hardware
The OtoRead
button. Paper will feed as long as the button is pressed.
TM
test instrument
The OtoRead
ear tips, replaceable probe tube and other accessories.
The OtoRead
1
the test stimuli, measuring and displaying the OAEs, and storing the
results until they are printed.
The plastic housing contains circuit boards that provide the signal
3
processing and display the test results. The instrument also contains
2 a rechargeable lithium-ion battery to power the device. On the top of
the device, a probe holder (1) can be found, to ensure safe storage of
the probe.
4
The instrument uses an organic light-emitting diode (OLED) display
screen (2) and three light-emitting diodes (LEDs) (3) to provide a
visual display of test status to the operator. Four membrane-type
push buttons (4) located on the keypad of the device allow the user to
control testing and printing, and to reset test protocols.
button, then press and hold POWER
TM
consists of the instrument, Micro-Probe, single-use
TM
contains the hardware and software for generating
Page 13