Printing To A Thermal Printer - Interacoustics OtoRead Instructions For Use Manual

OtoRead™ Instructions for Use - US
Through the instrument:
Save L/R mode:
Save 250 mode:
Through the PC module:
•
Data is deleted when new Patient Names are uploaded from the PC Module to the OtoRead
warning is provided that data will be deleted)
•
Data can be deleted in the OtoRead
TM
and OtoRead
via the Clear Instrument button. See the OtoRead

Printing to a thermal printer

Printing to an optional thermal printer is by way of wireless connection.
First establish wireless pairing between the OtoRead
in the section Instrument Settings - Wireless Device Pairing.
Note: See the printer operating manual for instructions on using the printer or chapter MPT-II
Mobile Thermal mini printer.
A single test for the left ear and a single test for the right ear are held in
memory. Data is deleted when a new test for the left or right ear is
acquired.
Note: Following printing or data transfer to the PC software, all tests
saved in memory are marked for deletion and will be permanently deleted
when a new test is started. It is not necessary to manually clear the
results.
•
Data is deleted when new Patient Names are uploaded from the
PC Module to the OtoRead
be deleted)
•
Data can be deleted using the Clear function in the System Menu
(page 39)
TM
from the PC Module when the device is connected to the PC
Module is opened. When Names is selected, the window allows data to be deleted
Following instructions provided with your printer, be sure the
printer is on and ready for communication/printing. From the
TM
OtoRead instrument Main Menu, press the
the device connection screen. Press the CONNECT button.
The OtoRead
is found, all the test results that are stored in memory will print out
automatically.
The OtoRead
TM
(a warning is provided that data will
TM
Module Manual for further instruction.
TM
and the printer by following the instructions
TM
will search for the paired printer. When the printer
TM
will power off when printing is complete.
Page 27
TM
(a
UP button to enter