Connector Specifications - Omron R88M-K Series User Manual

3-4 Cable and Connector Specifications

Connector Specifications

Control I/O Connector (R88A-CNU11C)
This is the connector to be connected to the Servo Drive's control I/O connector (CN1).
Use this connector when preparing a control cable by yourself.
For information on wiring method, refer to Control Cable Specifications (P.3-112).
This connector is soldered.
Dimensions
3
t = 18
Encoder Connectors
These connectors are used for encoder cables.
Use them when preparing an encoder cable by yourself.
For information on wiring method, refer to Encoder Cable Specifications (P.3-97).
Dimensions
R88A-CNW01R (Drive's CN2 side)
This connector is soldered.
t = 12
3-107
39
Connector plug model
10150-3000PE (Sumitomo 3M)
Connector case model
10350-52A0-008 (Sumitomo 3M)
43.5
Connector plug model
55100-0670 (Molex Japan)
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL