Survey - Auto Points; Overview - Leica TM30 Series Field Manual

14

Survey - Auto Points

14.1

Overview

Description
Survey - Auto Points
• Auto points is used to automatically measure and store points at a specific rate.
Additionally, individual auto points can be stored outside the defined rate. Auto
points logged between starting and stopping logging of auto points form one
chain. A new chain is formed each time logging of auto points is started.
• Auto points can be collected in the Survey application program. An Auto page
is visible when logging of auto points is active.
• Up to two offset points related to one auto point can be logged. The offset points
can be both to the left or right and they can be coded independently of each other
and of the auto points. Refer to "14.4 Offset Points of Auto Points".
TPS1200+/TS30/TM30 201