Viewing Angle And Distance Results In Two Faces - Leica TM30 Series Field Manual

10.2.7

Viewing Angle and Distance Results in Two Faces

Access
SETS
View XX Results
SETS
View Residuals in
Set XX
Sets of Angles
Press MORE (F5) in SETS Calculate Angles or SETS Calculate Distances.
Description of columns
Column
Set
Use
Hz Σr
V Σr
Next step
CONT (F1) accesses SETS Calculate XX.
TPS1200+/TS30/TM30
CONT (F1)
EDIT (F3)
USE (F4)
Description
Displays the numbers of all sets measured.
For Yes: The selected set is used for calculations.
For No: The selected set is not used for calculations.
Shows the calculated Σr in Hz of the selected set. Σr is the
sum of the difference between the reduced average direction
and each sets directions. For sets not used for calculation -----
is shown.
Shows the calculated Σr in V of the selected set. Σr is the sum
of the difference between the average V angles and each sets
V angles. For sets not used for calculation ----- is shown.
CONT (F1)
USE (F4)
MORE (F5)
To access SETS Calculate XX.
To view residuals in the highlighted
set.
To set Yes or No in the Use column
for the highlighted set.
To access SETS View XX Results.
To set Yes or No in the Use column
for the highlighted point.
To view additional information.
153