Distance Setting-Out Measurement - Sokkia im-101 Operator's Manual

8. Move the prism forward and backward until the setting-out
distance is 0 m. If S-OΔHD is "+", move the prism toward
yourself, if it is "-", move the prism away from yourself.
• By pressing [← →], an arrow pointing to the left or right
displays which direction the target should be moved.
← : Move the prism to left.
→ : Move the prism to right.
↓ : Move the prism forward.
↑ : Move the prism away.
 : Move the prism upward.
 : Move the prism downward.
When the target is within measurement range, all four
arrows are displayed.
9. Press {ESC} to return to step 4.
• When [LOAD] was used in step 4, the list of registered
coordinates is restored. Continue setting-out
measurement.
• [REC]: records measurement results
 Recording method: "28. RECORDING DATA - TOPO
MENU -"

15.2 Distance Setting-out Measurement

The point to be found based on the horizontal angle from the reference direction and the distance from the
instrument station.
PROCEDURE
1. Press [S-O] in the third page of the OBS mode screen to
display <S-O>.
2. Select "Occ.orien." to set the instrument station data and
azimuth angle of the backsight point.
"13.1 Entering Instrument Station Data and Azimuth
Angle PROCEDURE Reading in Registered Coordinate
Data"
15. SETTING-OUT MEASUREMENT
Back
R
Cut
ZA
HA-R
REC
HD
ZA
HA-R
REC REC
62

DISP MEAS

MEAS MEAS
DISP