Sokkia im-101 Operator's Manual page 112

4. Input coordinates for the second, third, and fourth points
("Line A-2", "Line B-1", and "Line B-2").
 step 3
5. Press [OK] to return to the screen in step 3 and continue
measurement as necessary.
• To quit measurement, press {ESC} in the screen of step 3.
23.1.4 2 Circles
This function calculates the intersection of the circumferences of 2 circles created by specifying the diameters
from 2 points.

• The 2 circles are created by specifying center points "Center1" and "Center2", and diameters , and radii
"Radius1" and "Radius2". Created circles must be set so as to converge. Calculation is not possible when
circles do not converge.
1. In the second page of OBS screen, press [MENU], then
select "Intersect.".
2. Select "2Circles".
3. Input coordinates for the first center point "Center1" and
press [OK].
• When [LOAD] is pressed, registered coordinates can be
recalled and used.
"13.1 Entering Instrument Station Data and Azimuth
Angle"
• Press [MEAS] to begin measurement.
Intersection
2: Radius 1
1: Center 1
Intersection
106
23. INTERSECTIONS
4 p t
N 345.678
E -876.543
REC S-O
4: Radius 2
3: Center 2
I n t e r s e c t i o n s
O cc. O ri en.
1pt , Azi m u
2 p t , A n g l e
4 p t
2 C i r c l e
1: C ent er1
N 1: 0. 000
E1: 0. 000
LOAD MEAS
P1
OK
P1
OK