Sokkia im-101 Operator's Manual page 156

5. Measure the second target point in the same manner as the
first one.
Confirm the measured result and press [OK].
6. Confirm the measured result of the baseline defined from
the line between the first target point and the second one.
Pressing [OK] sets the instrument's point coordinates and
angle.
Continue with the measurement of Point to Line.
• Pressing [S.CO] displays the instrument point coordinates
defined from the measurement results of the first target
point and the second one.
Pressing [OK] conducts measurement of Point to Line.
• Pressing [REC] records the coordinates for the instrument
point as known point data in the current JOB. The
instrument's station coordinates and height cannot be
changed at this time.
PROCEDURE Point to Line Measurement
1. Press "Point to line" on the second page of the OBS mode.
2. Select "Point to line".
3. Collimate the target point and press [MEAS]. The
measured result is displayed.
Measure 2nd PT
ZA
HA-R
HR
PT 1004
SD
ZA
HA-R
HR
1004
PT
REC
Baseline pt1-pt2
HD
VD
SD
S.CO
N0:
E0:
Z0:
HI
REC
Point to line
Define baseline
Point to line
N
E
Z
HR
PT
1001
150
27. Point to Line MEASUREMENT
4 5 1 2 3 4
1 7 8 5 6 3 1
2.000m
MEAS
5.123m
4 5 1 2 3 4
1 7 8 5 6 3 1
2.000m
MEAS OK
0.123m
-0.003m
0.156m
OK
20.000
30.000
40.000
2.000m
OK
2.500 m
S.CO MEAS