Sokkia im-101 Operator's Manual page 35

5. Select "S-Type".

• "T-Type" is for an instrument using GTS commands.
6. Perform communication settings for S-type.
Items set and options (*: Factory setting)
(1) Check sum : Yes/No*

• Changing communication settings during Bluetooth
communication will cancel the connection.
• No changes for the factory setting are necessary as long as connecting to a recommended program on
the data collector. If connection can not be established, check the communication settings of iM and the
data collector.
7. Select "Bluetooth" in <Communication Setup>.
Register the Bluetooth address (BD_ADDR) displayed here
in the paired device set as "Master".
8. Press {ENT} to finish settings. Move on to the Bluetooth
communication.

"9.2 Communication between the iM and Companion
Device"

Bluetooth device address
This is a number unique to one particular Bluetooth device used to identify devices during communication.
This number consists of 12 characters (numbers 0 to 9 and letters from A to F).
Some devices may be referred to by their Bluetooth device address.

• The followings are communication formats compatible with the iM.
T type GTS (Obs / Coord), SSS (Obs / Coord)
S type SDR33, SDR2X
Depending on the communication format used, select T type/S type.
• When selecting "T-type" in step 3, the following items are displayed.
(1) CR, LF
Yes/No*

(2) ACK mode
Standard*/Omitted

(3) ACK/NAK
Yes/No*
9. CONNECTING TO EXTERNAL DEVICES
Comms setup
T t ype
S t ype
Check sum :
Comms setup
Comms mode
Comms type
RS232C
Bluetooth
BD_ADDR
:ABCDEF012345
29
No