1. Select "Save code" on the first page of the USB mode.
2. Specify a file name and press {ENT}.
Entering extension name: " PROCEDURE Data saving
step5"
3. Pressing [OK] starts saving the code. When saving is
completed, the screen returns to the list of JOBs.
Pressing {ESC} stops saving.
32.4 Loading Data in USB flash drive to the iM
The known point data or code previously saved in a USB flash drive can be loaded to the current JOB.
• Only coordinate records having a file format compatible with the iM can be loaded to the iM.
Output format and command operations: "Communication manual"
PROCEDURE Reading Known Point Data
1. Select "Load known Pt." in Data mode.
2. Check the displayed current JOB name, then press [OK]
3. Select the input format.
(When T type is selected)
USB
Save data
Load known PT
Save code
Load code
File status
COD01. TXT
Date
Time
Format:CODE
123.4MB / 3.8GB
Remaining memory / Total memory size
USB
Save data
Load known PT
Save code
Load code
File status
Load known PT
Job.JOB1
Load known PT
GTS(Coord)
SSS(Coord)
176
32. USING USB FLASH DRIVE
: Jan/01/2017
: 08:00
OK
OK