Connecting To External Devices; Wireless Communication Using Bluetooth Technology - Sokkia im-101 Operator's Manual

9. CONNECTING TO EXTERNAL DEVICES

The instrument supports Bluetooth wireless technology and RS232C for communication with data collectors
etc. Inputting/outputting data is possible by inserting a USB flash drive or by connecting to a USB device. Read
this manual in conjunction with the operator's manual for the relevant external device.

• When doing Bluetooth communication, read "4.3 Bluetooth Wireless Technology/Wireless LAN".
9.1

Wireless Communication using Bluetooth Technology

The Bluetooth module incorporated in the instrument can be used for communication with Bluetooth devices
such as data collectors.

Bluetooth connection mode
Communication between a pair of Bluetooth devices requires one device to be set as the "Master" and the
other as the "Slave". iM is always "Slave" and the paired data collector will be the "Master" when
performing measurements and recording the data between them.

• When restoring set items to initial settings, reconfigure the Bluetooth communication settings.
PROCEDURE Setting for Bluetooth communication
1. Select "Comms setup" in Config mode.
2. Select "Comms mode" in <Communication Setup>.
3. Set "Comms mode" to "Bluetooth".
4. Select "Comms type" in <Communication Setup>.
Config
Obs.condition
Instr.config
Key function
Comms setup
Instr.const
Comms setup
Comms mode
Comms type
RS232C
Bluetooth
Comms mode
: Bluetooth
Comms setup
Comms mode
Comms type
RS232C
Bluetooth
28