Sokkia im-101 Operator's Manual page 175

2. Select "Key in code".
Enter the code and press {ENT}. The code is registered and
<Code> is restored.

• Maximum code size: 16 (alphanumeric)
• Maximum number of codes registered: 60
PROCEDURE Entering code from an external instrument

• Only the codes for communication formats compatible with "T type" can be input.
• When registering the code, it is necessary to select "T type" in the communication setting.
"33.1 Observation Conditions - Angle/Tilt" Communication Setup
1. Connect the iM and a host computer in advance.
2. Select "Code" in the Data mode.
3. Select "Comms input" and press [ENT].
Code communication starts and the number of transmitted
data is displayed. When transfer is completed, the screen
returns to <Code>.
• Pressing {ESC} stops data transfer.
PROCEDURE Deleting codes
1. Select "Code" in Data Mode.
2. Select "Deletion". The registered code list is displayed.
30. REGISTERING/DELETING DATA
Code
Key in code
Comms input
Comms output
Deletion
Code view
D a t a
J O B
K n o w n d a t a
C o d e
C o d e
K e y i n c o d e
C o m m s i n p u t
C o m m s o u t p u t
D e l e t i o n
C o d e v i e w
C o d e
F o r m a t
R e c e i v i n g
Code
Key in coord
Comms input
Comms output
Deletion
Code view
169
C O D E
1 5