Loading Data In Usb Flash Drive To The Im - Sokkia iM-50 Series Operator's Manual

32.4 Loading Data in USB flash drive to the iM

The known point data or code previously saved in a USB flash drive can be loaded to the current JOB.
• Only coordinate records having a file format compatible with the iM can be loaded to the iM.
Output format and command operations: "Communication manual"
PROCEDURE Reading Known Point Data
1. Select "Load known Pt." in Data mode.
2. Check the displayed current JOB name, then press [OK]
3. Select the input format.
(When T type is selected)
4. In the list of files, select the file to be read in and press
{ENT}.
5. Press [YES] to read in the file on the iM. <Media> is
restored.
To cancel reading, press {ESC}.
PROCEDURE Loading code
1. Select "Load code" on the first page of the USB mode.
USB
Save data
Load known PT
Save code
Load code
File status
Load known PT
Job.JOB1
Load known PT
GTS(Coord)
SSS(Coord)
ABCDE
FGHI
JKLMNOPQ
ZZZ
ABCDE
5354byte
Jan/01/2017
Format :GTS(Coord)
USB
Save data
Load known PT
Save code
Load code
File status
177
32. USING USB FLASH DRIVE
OK
OK
XYZ
PNT
TXT
SDR
XYZ
17:02
Confirm ?
NO YES