Moneris iPP320 PIN Pad Quick Install Manual page 9

4. Configure the iPP320 PIN Pad for a USB cable connection
a. On the "LANGUAGE/LANGUE" screen, select the iPP320 PIN Pad's default
display language:

To enable English as the default language, press the F1 key (ENGL).

For enable French as the default language, press the F4 key (FRAN).
b. When the "CABLE TYPE" menu displays, press the green
c. When the "QR-CODE" screen displays, press the F4 key (OFF).
d. When the "BEEP" screen displays, press the F1 key (ON).
e. When the "PED SERIAL NUMBER" screen displays, press the green
to continue.
Note: The serial number is the iPP320 PIN Pad's terminal ID, which is an
eight-digit number that starts with "61" (e.g., "61012345"). The terminal ID
is also printed on a sticker affixed to the iPP320 PIN Pad.
f. Wait while the IPP320 PIN Pad reboots.
g. When the "INIT REQUIRED" screen displays, go to step 5 (Identify the com
port the iPP320 PIN Pad is using when connected to your computer) on
page 8.
Moneris® iPP320 PIN Pad Merchant Resource Center Quick Install Guide
ENGL ENGL
key (USB).
USB
USB
RS232
ON
ON ON
key
PED
SERIAL NUMBER
61012345
PINPAD WILL
REBOOT IN
FEW SECONDS,
PLEASE WAIT
INIT REQUIRED
LANGUAGE/LANGUE
FRAN
CABLE TYPE
QR-CODE
OFF OFF
BEEP
OFF
7