Operation; Control Panel Operation; Menu Map; Dmx Configuration - Chauvet DJ EZLink Par Q4BT ILS User Manual

Hide thumbs Also See for EZLink Par Q4BT ILS:
Table of Contents

Advertisement

4. Operation

Control Panel Operation

To access the control panel functions, use the four buttons located next to the display. Please refer to the
Introduction
to see the button locations on the control panel.
Button
Function
<MENU> Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function

Menu Map

Refer to the EZLink Par Q4BT ILS product page on
Mode
4Ch
DMX Mode
8Ch
ILS Mode
iLS
Static Colors
C--
Automatic
P--
Programs
Auto Speed
S--
Dimmer
d--
Sound-
Snd
Active Mode
Sensitivity
SEnS
Custom
u--
Color Mixing
Bluetooth
bLE
Mode*
Control
SEt
Mode
*The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners.

DMX Configuration

The EZLink Par Q4BT ILS works with a DMX controller. Information about DMX is in the Chauvet DMX
Primer, which is available from the Chauvet website: www.chauvetdj.com.

DMX Personality and Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product's channels.
The EZLink Par Q4BT ILS uses up to 8 DMX channels in a 8Ch DMX mode, which defines the highest
configurable address to 505.
If you are not familiar with the DMX protocol, download the DMX Primer from: www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 4Ch or 8Ch shows on the display.
2. Press <ENTER> and d 1–509 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
9
Programming Levels
d 1–509
iLS1–4
C 1–15
P 1–5
S. 1–100
L. 1–255
Snd1–5
u 0–100
r. 0–255
G. 0–255
b. 0–255
A. 0–255
S. 0–100
_ _ _ _ _
ir
SLAV
out
www.chauvetdj.com
for the latest menu map.
Description
4-channel DMX mode
8-channel DMX mode
Sets ILS mode
Static colors
Automatic programs
Program speed for P 1–5
Dimmer
Sound-active programs
Sound sensitivity
Custom static colors combine red, green,
blue, and amber
Strobe rate
Bluetooth control mode, displays Bluetooth ID
on
Turns infrared on or off
oFF
Enable Master/Slave with other BT products
dMX
Enable Master/Slave with non-BT products
EZLink Par Q4BT ILS User Manual Rev. 2
Operation

Advertisement

Table of Contents
loading

Table of Contents