Table of Contents
Advertisement
Operation
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview
to see the button locations on the control panel.
Button
Function
<MENU>
Press to find an operation mode or to back out of the current menu option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Menu Map
Refer to the EZBeam Q3 ILS product page on
Mode
6Ch
9Ch
DMX Mode
14Ch
17Ch
ILS
iLS
Static Colors
C--
Programs
P--
Auto Speed
S--
Sound Mode
Snd
Sensitivity
SEnS
Custom
U--
Color Mixing
Dimmer
Din
Speed
Infrared
SEt
Mode
DMX Configuration
The EZBeam Q3 ILS works with a DMX controller. Information about DMX is in the Chauvet DMX Primer,
which is available from the Chauvet website chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Personality and Starting Address
The EZBeam Q3 ILS uses up to 17 DMX channels in the 17Ch DMX mode, which defines the highest
configurable/recommended address to 496.
When selecting a starting DMX address, always consider the number of DMX channels the DMX mode
uses. If the starting address is set too high, access to some channels could be restricted.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the personality and starting address, do the following:
1. Press <MENU> repeatedly until 6Ch, 9Ch, 14Ch or 17Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from d001–d496.
4. Press <ENTER>.
EZBeam Q3 ILS User Manual Rev. 1
www.chauvetdj.com
Programming Levels
d001–507
d001–504
d001–499
d001–496
ILS1–4
C001–023
P 1–9
S001–100
Snd1–9
u001–100
r000–255
G000–255
b000–255
A000–255
diN1–3
oFF
bAt
ir
oFF
rSET
for the latest menu map.
Description
6-channel DMX mode
9-channel DMX mode
14-channel DMX mode
17-channel DMX mode
Sets ILS mode
Static colors
Automatic programs
Program speed for P 1–5
Sound-active program, blackout without sound
Sets sound sensitivity
Custom static colors
Combine red, green, blue, and amber
Sets the dimmer speed
Disables the dimmer speed
Shows the battery power
on
Turns infrared on or off
Reset to factory default settings
9
Advertisement
Table of Contents
