Adjusting The Back Angle; Adjusting The Armrests - Otto Bock C2000 Instructions For Use Manual

7.3.3 Adjusting the back angle

The angle of the backrest can be adapted to the requirements of the user.
4
Power back angle adjustment
The back angle is adjusted as needed by using this seat function (see Page 39).
®
Recaro seat
For all adjustments: see Page 44.

7.3.4 Adjusting the armrests

CAUTION
Reaching into swivel region
Pinching or crushing of limbs (e.g. fingers) due to lack of caution in danger areas
► Do not reach into the swivel region.
The height and depth of the armrests can be adapted to the requirements of the user.
5
6
C2000
Back angle adjustment on standard seat
1) Pull on the strap until the locking bolts are free.
2) Move the backrest to the desired position.
3) Allow the locking bolts to engage.
4) Check to ensure they are securely engaged.
Move the armrest to the required height
1) Loosen the Allen head screw on the side panel
mounting.
2) Slide the armrests up or down to the desired posi­
tion.
3) Retighten the Allen head screw.
Adjusting the armrest to the forearm length
1) Loosen the 2 Allen head screws on the underside of
the armrest.
2) Push the armrest to the front or back into the
desired position.
3) Tighten the 2 Allen head screws.
Settings
Ottobock | 17