Operating manual Pneumatic double diaphragm pump ZIP52 - ZIP80
5 Description
5 DESCRIPTION
5.1 COMPONENTS
3
4
6
5
1
Delivery manifold
2
Air input
3
Product output
5.2 MODE OF OPERATION
The double diaphragm pump is driven with compressed air. A pneumatic manifold
alternates in supplying two diaphragms with compressed air. Diaphragm motion is created
in this manner. The product is thus sucked in and displaced again. A series of four non-return
valves prevents the liquid from flowing back, thus producing the suction and delivery
phases in each pumping chamber, and generating the pumping effect.
5.3 PROTECTIVE AND MONITORING EQUIPMENT
WARNING
Overpressure!
Danger to life from bursting device components.
4 Never change the safety valve setting.
The air motor is fitted with a safety valve. The safety valve has been set and sealed at the
factory. In case of pressures over and above the permissible operating pressure, the valve,
which is held with a spring, automatically opens and releases the excess pressure.
20
1
2
3
4
B_06950
4
5
6
Product input
Product distributor
Grounding connection
Order number DOC 2330426 | Edition 09/2021