Table of Contents
Advertisement
Operating manual Pneumatic double diaphragm pump TOPFINISH DD10 Alu NiP
5 Description
5 DESCRIPTION
5.1 COMPONENTS
1
6
5
B_05370
Pos Designation
1
Air output for gun air
2
Product output
3
Product input
4
Air input
5
Pump housing
6
Pressure regulator unit
5.2 MODE OF OPERATION
The double diaphragm pump is driven with compressed air. A pneumatic manifold
alternates in supplying two diaphragms with compressed air. Diaphragm motion is created
in this manner. The product is thus sucked in and displaced again. A series of four non-return
valves prevents the liquid from flowing back, thus producing the suction and delivery
phases in each pumping chamber, and generating the pumping effect.
5.3 PROTECTIVE AND MONITORING EQUIPMENT
WARNING
Overpressure!
Danger to life from bursting device components.
4 Never change the safety valve setting.
The air motor is fitted with a safety valve. The safety valve has been set and sealed at the
factory. In case of pressures over and above the permissible operating pressure, the valve,
which is held with a spring, automatically opens and releases the excess pressure.
5.4 SCOPE OF DELIVERY
Stk
Order no.
1
The standard equipment includes:
1
See Chapter EU Declaration of Con-
formity [8 60]
1
2366669
1
See Chapter Languages [8 6]
18
3
2
4
Designation
—
TOPFINISH DD10 diaphragm pump
Declaration of Conformity
Operating manual, in German
Operating manual in the local language
Order number DOC 2366672 | Edition 08/2020
Advertisement
Table of Contents
