Function:
The command starts the saving setup function. If the waveforms are in internal
flash, the <file_spec> is composed of integers among 0~9; if in external
storage medium, the <file_spec> is composed of ASCII characters.
10. :SAVE:CSV:STARt
Command Format:
:SAVE:CSV:STARt <file_spec>]
NOTE: In external save, the file name must add double quotation marks.
Function:
The command sets the saving function of CSV file on. CSV file can be saved in
external storage medium. The <file_spec> is the file name and must be ASCII
characters, and the length of file name must be less than 256 characters.
11. :RECall:WAVeform:STARt
Command Format:
:RECAll:WAVeform:STARt <file_spec>
NOTE: In external save, the file name must add double quotation marks.
Function:
The command sets the recalling waveform function on. If the waveforms are in
internal flash, the <file_spec> is composed of integers among 0~9; if in
external storage medium, the <file_spec> is composed of ASCII characters.
12. :RECall:SETup:STARt
Command Format:
:RECAll:SETup:STARt <file_spec>
NOTE: In external save, the file name must add double quotation marks.
Function:
The command sets the recalling setup function on. If the waveforms are in
internal flash, the <file_spec> is composed of integers among 0~9; if in
external storage medium, the <file_spec> is composed of ASCII characters.
Programming Guide for DS1000B Series
RIGOL
2-95