Rigol DS1204B Programming Manual page 52

RIGOL
3. :CHANnel<n>:DISPlay
Command Format:
:CHANnel<n>:DISPlay□{{1|ON}|{0|OFF}}
Function:
The command sets the channel ON or OFF. The <n> may be 1, 2, 3 or 4.
Query Format:
:CHANnel<n>:DISPlay?
Return Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Examples:
:CHANnel2:DISPlay□ON
:CHANnel2:DISPlay?
4. :CHANnel<n>:INVert
Command Format:
:CHANnel<n>:INVert□{{1|ON}|{0|OFF}}
Function:
The command sets waveform invert function ON (the inverted waveform is
display) or OFF (the normal waveform is display). The <n> may be 1, 2, 3 or 4.
Query Format:
:CHANnel<n>:INVert?
Return Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Example:
:CHANnel2:INVert□OFF
:CHANnel2:INVert?
5. :CHANnel<n>:OFFSet
Command Format:
:CHANnel<n>:OFFSet□<offset>
2-44
Set channel 2 on.
Return 1.
Set the invert function of channel 2 off.
Return 0.
Programming Guide for DS1000B Series