Rigol DS1204B Programming Manual page 100

RIGOL
1. :SAVERECALL:TYPE
Command Format:
:SAVERECALL:TYPE□<type>
Function:
The command sets the data type for storage. The <type> may be WAVeform
(waveform data) or SETups (data settings).
Query Format:
:SAVERECALL:TYPE?
Return Format:
The query returns WAVEFORMS or SETUPS.
Example:
:SAVERECALL:TYPE□WAVeforms
Set the storage type as waveform data.
:SAVERECALL:TYPE?
2. :SAVERECALL:LOCation
Command Format:
:SAVERECALL:LOCation□<location>
Function:
The command sets the storage location. The <location> may be 0~9.
Query Format:
:SAVERECALL:LOCation?
Return Format:
The query returns 0 or 1 ......9.
Example:
:SAVERECALL:LOCation□1
:SAVERECALL:LOCation?
3. :SAVERECALL:LOAD
2-92
Return WAVEFORM.
Set the storage location as the second.
Return 1.
Programming Guide for DS1000B Series