Rigol DS1204B Programming Manual page 102

RIGOL
Example:
:SAVE:IMAGe:FACTors□ON
:SAVE:IMAGe:FACTors?
7. :SAVE:IMAGe:FORMat
Command Format:
:SAVE:IMAGe:FORMat□<format>
Function:
The command sets the format of saved image. The <format> may be 24bit real
color (BMP|BMP24bit), 8bit bitmap (BMP8bit) or PNG (PNG).
Query Format:
:SAVE:IMAGe:FORMat?
Return Format:
The query returns BMP24bit, BMP8bit or PNG.
Example:
:SAVE:IMAGe:FORMat□BMP
:SAVE:IMAGe:FORMat?
8. :SAVE:WAVeform:STARt
Command Format:
:SAVE:WAVeform:STARt <file_spec>
NOTE: In external save, the file name must add double quotation marks.
Function:
The command starts the saving waveform function. If the waveforms are in
internal flash, the <file_spec> is composed of integers among 0~9; if in
external storage medium, the <file_spec> is composed of ASCII characters.
9. :SAVE:SETup:STARt
Command Format:
:SAVE:SETup:STARt <file_spec>
NOTE: In external save, the file name must add double quotation marks.
2-94
Save the system parameters.
Return 1.
Set the format as 24 bit real color.
Return BMP24bit.
Programming Guide for DS1000B Series