Rigol DS1204B Programming Manual page 101

Command Format:
:SAVERECALL:LOAD
Function:
The command recalls the waveform or setup data from internal flash according
to storage type.
4. :SAVERECALL:SAVE
Command Format:
:SAVERECALL:SAVE
Function:
The command saves the waveform or setup to internal flash according to
storage type.
5. :SAVE:IMAGe:STARt
Command Format:
:SAVE:IMAGe:STARt <file_spec>
NOTE: In commands, the file name must add double quotation marks.
Function:
The command saves the image. The <file_spec> is the file name and must be
ASCII characters, and the length of file name must be less than 256 characters.
6. :SAVE:IMAGe:FACTors
Command Format:
:SAVE:IMAGe:FACTors□{{1|ON}|{0|OFF}}
Function:
The command sets the saving function of system parameters on or off. The
function indicates to save a file which records all system parameters while
saving image.
Query Format:
:SAVE:IMAGe:FACTors?
Return Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Programming Guide for DS1000B Series
RIGOL
2-93