Horizontal Commands - Rigol DS1204B Programming Manual

Horizontal Commands

Horizontal Commands are used to set horizontal scale and horizontal offset.
Changing horizontal scale makes the waveform enlarge or shrink; and changing
horizontal position will lead the waveform offset relative to center screen.
Horizontal Commands include:
:TIMebase:MODE

:TIMebase:DELayed:OFFSet

:TIMebase:DELayed:SCALe

:TIMebase[:MAIN]:OFFSet

:TIMebase[:MAIN]:SCALe

:TIMebase:FORMat

Programming Guide for DS1000B Series
RIGOL
2-49