Rigol DS1204B Programming Manual page 38

RIGOL
24. :MEASure:TOTal
Command Format:
:MEASure:TOTal□{{1|ON}|{0|OFF}}
Function:
The command sets all the measurement functions on or off.
Query Format:
:MEASure:TOTal?
Return Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Example:
:MEASure:TOTal□ON
:MEASure:TOTal?
25. :MEASure:SOURce
Command Format:
:MEASure:SOURce□<source>
Functions：
The command selects the measurement channel. The <source> may be
CHANnel1, CHANnel2, CHANnel3 or CHANnel4.
Query Format:
:MEASure:SOURce?
Return Format:
The query returns CH1 or CH2, CH3, CH4.
Example:
:MEASure:SOURce□CHANnel1
:MEASure:SOURce?
26. :MEASure:DELAYSOURce
2-30
Set the total measurement function on.
Return 1.
Measure the signal from CH1.
Return CH1.
Programming Guide for DS1000B Series