Seagull Models SuperDave MX2 Assembly Manual page 16

SUPER DAVE MX2
1) Using a small weight (Weighted fuel pick-
up works well) and string, feed the string
through the wing as indicated.
2) Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole locations
on the blocks.
3) Use drill bit in a pin vise to drill the mout-
ing holes in the blocks.
.
4) Apply 2-3 drops of thin C/A to each of the
mounting holes. Allow the C/A to cure with-
out using accelerator.
5) Use dental floss to secure the connection
so they cannot become unplugged.
16 16
Instruction Manual.
6) Secure the servo to the aileron hatch using
Phillips screwdriver and the screws provided
with the servo.
7) Apply 1-2 drops of thin C/A to each of the
mounting tabs. Allow the C/A to cure with-
out using accelerator.
C/A glue.