3 SPECIFICATIONS
3.5.2 Communication cycle time
3 - 49
The communication cycle time is an interval from the time a polling or bit strobe
request is sent to a slave node until another request is sent to the same node.
The calculation formulas for the communication cycle time of each slave node are
shown below.
(1) LS<PIT: LC = LS + PIT [ms]
(2) LS > PIT: LC = LS [ms]
LC: Communication cycle time [ms]
LS: Link scan time [ms] (Refer to Section 3.5.1.)
PIT: Production inhibit time [ms] (Refer to Section 3.4.5.)
MELSEC-Q
3 - 49