Program Example Using The Utility Package; Program Example Not Using The Utility Package - Mitsubishi Electric QJ71DN91 User Manual

8 PROGRAMMING FOR EXECUTING THE SLAVE FUNCTION

8.2.1 Program example using the utility package

8 - 3
(1) Setting example
(a) Setting the parameters for slave function.
Clicking the Parameter Area Monitor/Test button on the [Monitor/Test]
screen will display the [Parameter Area Monitor/Test] screen.
For information on how to display the [Monitor/Test] screen, refer to Section
6.3.
1) Enter "16" for "Slave Function Input Sizes Setting Area" and "Slave
Function Output Sizes Setting Area".
Select "16"
2) To start I/O communication automatically at power-up, set "Start" for
"Auto Communication Start Setting".
Select "Start"
3) Click the Close button.
(b) Saving the parameters to the flash ROM (Refer to (2) in this section.)
Execute test button
Execute test button
MELSEC-Q
1)
2)
3)
8 - 3