X/Y Monitor/Test - Mitsubishi Electric QJ71DN91 User Manual

6 UTILITY PACKAGE (GX Configurator-DN)

6.5.1 X/Y monitor/test

6 - 19
[Purpose]
Monitor I/O signals and tests output signals.
[Operating procedure]
Monitor/Test screen
[Setting screen]
[Setting items]
Item
X00: Watchdog Timer Error
X01: I/O Communicating
X02: Message Communication Completion
X03: Error Set Signal for Master Function
X04: Slave Down Signal
X05: Message Communication Error Signal
X06: Saving Parameters to Flash ROM
X07: Parameters Saved to Flash ROM
X08: Error Set Signal for Slave Function
X0A: H/W Test in Progress
X0B: H/W Test Completion
X0C: H/W Test Error Detection
X0F: Module Ready
X14: Auto-Configuring
X15: Auto Configuration Completion
Y11 : I/O Communication Request
Y12: Message Communication Request
Y13: Error Reset Request for Master Function
Y15: Auto Configuration Request
Y17: Request for Saving Parameters to Flash ROM
Y18: Error Reset Request for Slave Function
X/Y Monitor/Test
Buffer memory address (Hex.)
MELSEC-Q
Reference
section
3.3.2 (1)
3.3.2 (2)
3.3.3 (2)
3.3.2 (3)
3.3.2 (4)
3.3.2 (5)
3.3.2 (3)
3.3.2 (6)
3.3.3 (4)
– 3.3.2 (9)
3.3.2 (7)
3.3.2 (8)
3.3.2 (2)
3.3.3 (2)
3.3.2 (3)
3.3.2 (4)
3.3.2 (8)
3.3.2 (6)
3.3.3 (4)
6 - 19