6 UTILITY PACKAGE (GX Configurator-DN)
6.5.15 Auto configuration
6 - 29
[Purpose]
Using the auto configuration, set the parameters for master function.
Follow the instructions shown in the Setting item column.
[Operating procedure]
Scroll down on the Monitor/Test screen.
[Setting screen]
[Setting items]
Item
1. Stop I/O Communication.
2. Set Auto Configuration Operation.
3. Execute Auto Configuration.
4. Confirm Auto-Configured Parameters.
5. Save Parameters to Flash ROM.
MELSEC-Q
Buffer memory address (Hex.)
–
Reference
section
3.3.2 (8)
7.3.1 (1)
6 - 29